Start with the belt that fits your sander
Before you think about grit, confirm that your machine takes a 4 x 90 inch belt. The 4 x 90 Aluminum Oxide Metal Sanding Belts, 3 Pack is built to that size, and no other length or width will track correctly on a sander designed for 4 x 90. Once the size matches, the rest of the decisions are about the metal, the finish you need, and how you run the belt.
These belts are closed coat aluminum oxide with a load and heat reducing top coat, a resin-over-resin bond, and X-weight polyester/cotton backing. The bi-directional tape joint lets the belt run in either direction, so you can disregard the arrows printed on the belt. That flexibility helps when you mount a belt on a machine with a specific rotation or when you simply want to reverse the belt to balance wear.
What the 4 x 90 belt is built for
- 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Closed coat aluminum oxide with a load and heat reducing top coat, designed specifically for use on metal. The closed coat and grinding aid help the belt keep cutting on metal instead of loading up quickly, which is the main reason to choose this belt over a general-purpose wood belt.

4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack - 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Heavy duty X-weight polyester/cotton backing can handle spritzing but is not fully waterproof. You can mist the belt or work area lightly to manage heat and dust, but you should not soak the belt or run it under continuous water.
- 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Applications include stainless steel, high and low carbon steel, nonferrous metals (aluminum, copper, titanium, nickel, etc.), hardwood and solid surface. This belt covers the metals most often deburred and finished in a small shop, plus hardwood and solid surface, so it can serve as a versatile belt if your sander takes 4 x 90.
Match grit to the metal task
The 4 x 90 belt is available in 36, 40, 60, 80, 100, 120, 180, 220, 320, and 400 grit. Use the coarse end for heavy stock removal and deburring, the middle for general cleanup and scratch blending, and the fine end for finishing before polishing or coating. A practical sequence for many metal jobs is to start one grit coarser than the deepest scratch you need to remove, then step through two or three grits to reach your target finish. For example, after a 36 or 40 grit belt, move to 60 or 80, then 120 or 180, and finish with 220 or finer if the surface will be visible or needs a smooth prep for paint or plating.
On stainless and carbon steel, the load and heat reducing top coat helps reduce clogging, but you still need to manage heat. Light spritzing is acceptable because the backing can handle it, but the belt is not fully waterproof. Avoid flooding the belt or leaving it wet, and let the belt cool between heavy passes. On aluminum and other nonferrous metals, the closed coat and grinding aid reduce loading, but keep the belt moving and use light pressure to avoid smearing.
A simple setup and use sequence for 4 x 90 belts
- Check the sander and belt size: Confirm your machine is designed for 4 x 90 inch belts. The belt should slide onto the platens and pulleys without forcing.
- Mount the belt in either direction: The bi-directional tape joint allows the belt to run in either direction, so you can disregard the arrows. Make sure the joint is seated smoothly and the belt tracks centered before applying power.
- Set a safe starting speed: The supplied information does not specify operating speeds or loads for this belt. Follow your sander manufacturer's instructions for speed and tension, and start with a light pass to check tracking and finish.
- Use light spritzing only: The X-weight backing can handle spritzing, but it is not fully waterproof. Mist lightly if needed for dust control or heat, and avoid continuous water.
- Work through grits: Start with the coarsest grit needed for the job, then step to finer grits. Clean the workpiece between grits to avoid carrying coarse scratches forward.
- Inspect and adjust: Check the surface after each pass. If the belt is loading or the finish is uneven, reduce pressure, adjust speed, or change to a fresh belt.
Grit starting points for common metal tasks
- Heavy deburring and stock removal: Start with 36 or 40 grit for fast material removal and knocking down weld spatter or heavy burrs. Follow with 60 or 80 to refine the scratch pattern.
- General deburring and edge cleanup: 60 or 80 grit is a practical starting point for everyday deburring and blending on steel and nonferrous metals.
- Surface blending and scratch removal: Use 100 or 120 grit to blend scratches and prepare for finer finishing. Step to 180 if you need a smoother surface before paint or coating.
- Finishing and pre-polish: 220, 320, and 400 grit are for final finishing steps. Use them after coarser grits have removed the deeper scratches.
Where this belt fits, and where it does not
This belt is a strong choice for knife making and general metalworking because the aluminum oxide abrasive and grinding aid top coat are designed for metal. It also lists hardwood and solid surface as applications, so it can handle those materials if your sander takes 4 x 90 belts. However, the backing is not fully waterproof, so it is not a substitute for a wet belt if you need continuous water cooling. For heavy, continuous wet grinding, look for a belt specifically rated as waterproof.
The belt is hand built in the USA and comes in a 3 pack. The available grits range from 36 to 400, so you can build a sequence from coarse to fine. If you need a grit outside that range, the supplied information does not list it for this product, so you would need to check the store for other options.
Pack and ordering details
- 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Pack quantity: 3 belts. A 3 pack lets you keep a spare on hand or set up a short grit sequence without ordering multiple packs.
- 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Available grits: 36, 40, 60, 80, 100, 120, 180, 220, 320, 400. The range covers coarse deburring through fine finishing, so you can choose the grit that matches your task.
- 4 X 90 Inch Aluminum Oxide Metal Sanding Belts, 3 Pack: Joint: bi-directional tape joint allows the belt to run in either direction (disregard arrows). You do not need to worry about belt orientation when mounting, which simplifies setup.

